Researchers from Chalmers University of Technology, Sweden, Accurion GmbH, Germany and Institute of Organic Synthesis and Photoreactivity (ISOF) at the National Research Council of Italy have presented a novel concept for fabricating high-performance electrode materials for sodium batteries. It is based on a novel type of graphene to store one of the world's most common and cheap metal ions sodium. The results of their study show that the capacity can match today’s lithium-ion batteries.
Sodium, unlike lithium, is an abundant low-cost metal, and a main ingredient in seawater. This makes sodium-ion batteries an interesting and sustainable alternative for reducing our need for critical raw materials. However, one major challenge is increasing the capacity. At the current level of performance, sodium-ion batteries cannot compete with lithium-ion cells. One limiting factor is the graphite, which is used as the anode in today’s lithium-ion batteries.
We have added a molecule spacer on one side of the graphene layer. When the layers are stacked together, the molecule creates larger space between graphene sheets and provides an interaction point, which leads to a significantly higher capacity, says researcher Jinhua Sun at the Department of Industrial and Materials Science at Chalmers and first author of the scientific paper.
Typically, the capacity of sodium intercalation in standard graphite is about 35 milliampere hours per gram (mA h g-1). This is less than one tenth of the capacity for lithium-ion intercalation in graphite. With the novel graphene the specific capacity for sodium ions is 332 milliampere hours per gram approaching the value for lithium in graphite. The results also showed full reversibility and high cycling stability.
It was really exciting when we observed the sodium-ion intercalation with such high capacity. The research is still at an early stage, but the results are very promising. This shows that it’s possible to design graphene layers in an ordered structure that suits sodium ions, making it comparable to graphite, says Professor Aleksandar Matic at the Department of Physics at Chalmers.
The study was initiated by Vincenzo Palermo in his previous role as Vice-Director of the Graphene Flagship, a European Commission-funded project coordinated by Chalmers University of Technology.
The novel graphene has asymmetric chemical functionalization on opposite faces and is therefore often called Janus graphene, after the two-faced ancient Roman God Janus the God of new beginnings, associated with doors and gates, and the first steps of a journey. In this case the Janus graphene correlates well with the roman mythology, potentially opening doors to high-capacity sodium-ion batteries.
Our Janus material is still far from industrial applications, but the new results show that we can engineer the ultrathin graphene sheets and the tiny space in between them for high-capacity energy storage. We are very happy to present a concept with cost-efficient, abundant and sustainable metals, says Vincenzo Palermo, Affiliated Professor at the Department of Industrial and Materials Science at Chalmers.
The material used in the study has a unique artificial nanostructure. The upper face of each graphene sheet has a molecule that acts as both spacer and active interaction site for the sodium ions. Each molecule in between two stacked graphene sheets is connected by a covalent bond to the lower graphene sheet and interacts through electrostatic interactions with the upper graphene sheet. The graphene layers also have uniform pore size, controllable functionalization density, and few edges.
